High Pressure Steam Generator Irons. Designed to cut your ironing time in half, high pressure steam generator irons are ideal for professional results, fast. An integrated boiler transforms water into high pressure steam to penetrate fabrics more deeply, and remove creases quickly and efficiently.
The pump is a standard 110v ac motor driving a screw pump to maintain pressure at 55 psi for the hydrostatic bearing. the oil is also use to cool the alternator during runs. the oil is returned to the bath via a radiator or heat exchanger.
In only three minutes you will have 350° steam at high pressure – 100 psi! You will have plenty of steam. The unit has an on-board 1250 gallon water reserve tank. You will have long lasting, non-stop steam and hot water. The diesel tank is large enough to fuel 48 hours of operation before refilling. The steam generator is self-contained.
Please refer to Fig. 11.8.1, Item 4.Observe the jacket in the bearing housings. The purpose of this jacket is to cool the oil in the bearing bracket. When the inlet steam pressure is high, the high temperature of the steam is transmitted to the steam end inlet bearing through the shaft.
Clayton Steam Generator Principle of Operation. The Clayton Steam Separator is a high efficiency centrifugal design that has no moving parts. The very high steam quality is produced even under variable load conditions and is at least 99.5% dry saturated.
A Steam Separator is factory supplied to dry the steam prior to being introduced into the clean steam line. High Pressure Cutoff. CEMLINE Unfired Steam Generators are furnished with an adjustable high pressure cut off wired to close the control valve in the event of over pressure. The high pressure cut off also has an adjustable differential.
Alibaba.com offers 5,964 high pressure steam generator products. About 91% of these are boilers, 1% are diesel generators, and 1% are alternative energy generators. A wide variety of high pressure steam generator options are available to you, such as natural circulation, once through.
Manufacturer and exporter of steam generators, industrial boilers, water softeners, steam generators, hot water generators, small steam boilers, steam boilers, thermic fluid heaters, industrial heaters, hot air generators, IBR boilers, oil burners, shell type hot water generators from Ross Boilers, Pune, Maharashtra, India
Steam Boilers Mobile Steam rents high and low pressure steam boilers ranging from 5 to 300 PSI. Equipment sizes range from 20 to 800 HP. Our well-maintained fleet of mobile steam and hot water boilers features world-class equipment from American manufacturers like Cleaver-Brooks™, Fireye™ and Honeywell™.
High Pressure Condensate Return (HPR) Systems. The steam generator normally includes an HPR (High Pressure Return) System to collect the condensate from the process so that it can be treated and returned back to the steam generator. An HPR system improves any steam system efficiency by 15-35% depending on operation so it is a good fit
High Pressure Condensate Return (HPR): Industrial Steam HPR specifically designed for the corrugating industry. Zero Flash: High Pressure Condensate return systems that conserve energy by pumping hot water directly from the process into the steam boiler.
These high pressure steam generators are primarily used with a deodorizer (deodoriser) during the final stage in oil refining. Deodorising removes odoriferous material, free fatty acids and other undesired minor components to produce edible oils or biodiesel.
Low Cost, High Pressure Compact Steam Boilers for Industrial Applications with Rapid start up and Low cost coil replacement. Rent, buy, or buy refurbished. Call Now: 513-271-2226
Electric Steam Boilers. Vertical pressure vessel means dryer steam; Compact footprint; Lower circuit loading allows for overvoltage conditions; Individually replaceable elements; High Pressure; Steam from: 30 kW to 4320 kW (102 to 14,688 PPH) Pressure from: 15 – 2500 PSIG Voltages from: 208 – 600 Volts
China High Pressure Steam Generator manufacturers - Select 2019 high quality High Pressure Steam Generator products in best price from certified Chinese High Pressure Pump manufacturers, High Temperature Materials suppliers, wholesalers and factory on Made-in-China.com
To get so high temperatures, many industries rely on diathermic oil boilers, but it is not allowed in the food sector due to the intrinsic danger of pollution. The solution is therefore to use high pressure steam and, for this reason, the GMT/HP steam generator represents the ideal system.
The Modulatic® Steam Generator is a once through watertube boiler with a positive displacement pump to provide a constant supply of feedwater. The burner management system controls the amount of feedwater admitted to the coils by regulating the speed of the pump, based on the steam pressure set point compared to the actual reading.
Mar 01, 2014 · The Steam-Flo SF-50 steam generator provides a portable source for low-pressure steam. The SF-50 features a 50 horsepower boiler unit and is capable of producing up to 1,725 lb/h (782 kg/h) of saturated steam vapor, operating at 15 psi. Available with diesel-fuel or natural-gas fired burners, this
Steam-Mate is a light weight gas powered steam generator. Steam-Mate is handy to use for melting ice in water pipes and drains and for producing hot water in ﬁ eld conditions. Steamrator steam generators are manufactured and inspected according the pressure equipment directive of the EU and CE marked.
In contrast to a "subcritical boiler", a supercritical steam generator operates at such a high pressure (over 3,200 psi or 22.06 MPa) that actual boiling ceases to occur, the boiler has no liquid water - steam separation.
High Pressure Clayton Steam Plant This video shows the installation of a complete Clayton high pressure steam supply system that provides 62,100 lbs./hr. (25 tonnes per hour) of steam at a pressure of 1300 psig (90 barg).
It can be operated up to 13- 14 PSI maximum. A high pressure steam boiler is a Section I boiler and they are usually stamped for 100, 125 or 150 PSI. There is a direct correlation between steam pressure and temperature. 10 PSI steam equates to 240o F (115o C)and 15 PSI steam = 250o F (121o C).
with conventional high pressure boilers. Since the objective of a steam injection installation is to get heat into the oil bearing strata, the usual practice is to Inject the combined steam-water mixture leaving the steam generator into the injection well. The liquid present at the steam generator outlet contains a considerable amount of
A steam generator is a type of boiler used to produce steam for climate control and potable water heating in railroad passenger cars. The output of a railroad steam generator is low pressure, saturated steam that is passed through a system of pipes and conduits throughout the length of the train.
Gas, oil, coal, solid waste, biomass fuel-fired steam boilers, hot water boilers. thermal oil heaters. Boiler Product Line includes packaged boilers, fire-tube, water-tube boilers for all heating & process applications including: schools, dry cleaning, hospitals, universities, military & all commercial/industrial operations.
Manufacturer of Oil / Gas Fired High Pressure Natural Circulation Steam Generator, Solid Fuel Fired High Pressure Natural Circulation Steam Generator, High Efficiency Oil & Gas Fired Direct Edible Oil Heater offered by Isotex Corporation Private Limited, Ahmedabad, Gujarat.
Ejector for Surface Condenser. High pressure motive steam enters the jet ejector through the inlet nozzle and is then diffused. This creates a low pressure zone which entrains air from the surface condenser. In a similar type of application, steam is also the primary motive fluid for secondary pressure drainers,
The NUK® High-Pressure Steam Generator is a closed looped (hermetically sealed) system that produces steam for high-temperature applications. Therefore, this steam generator is able to produce non-toxic process heat while offering the same advantages of a conventional hot oil system .
Steam Generators - Low Pressure Boiler. This low pressure boiler also speeds up the curing process for pre-cast concrete, pipe, pre-stress, block operations, saturating the curing area with steam, uniformly heating the concrete and speeding up the normal process. Due to its portability, the steam generator is ideal for use in overflow production and outlying areas.
The natural circulation boiler – type iNook is a High Pressure Steam generator of vertical design especially developed for closed circuits. It is installed directly below the steam consumer (the condenser) connected to it and not capable of being shut off.
high pressure steam comes out the other. The Clayton Steam Generator is a unique design that does just that. Instead of the familiar steam train image of a boiler we now have a compact steam making machine with staggering advantages for the world we live in today. The Clayton Steam Generator uses only three main components.
Dec 27, 2012 · of oil under strategic journals of the turbo generator and oil lifts the shaft slightly. This greatly reduces the static friction and bearing wear. The JOP can be stopped after the lubricating oil film is established between the shaft and bearings. Pressure produced is 120 bars; 3.5) Main oil tank. The oil used for lubrication is stored in the Mai Oil Tank.
$ High-high level in any steam generator, and $ Low auto-stop oil pressure. 220.127.116.11 Auto-Stop Oil System A combined lubricating and auto-stop oil system supplies lubricating oil to the turbine and generator bearings and keeps the interface valve closed during normal operation. Figure 11.3-2 shows this combination system. The EH fluid and auto-
The problems of steam trapping high pressure (600 - 2500 psi) saturated or superheated (up to 1100°F) steam systems in fossil and nuclear power stations, aboard merchant and military ships, and in heavy oil extraction
This practice is most common in high-pressure boilers generating superheated steam for a turbine drive. Successive blows are made until solid particle erosion is no longer visible on the target plate. The required blow time varies, but in general is approximately 24 hr unless chemical cleaning has preceded the blow.
MODEL GMT-HP. High pressure steam generator (up to 110 bar), with natural circulation Typology: c oil, 3 passes, through furnace, vertical, designed for high pressure, natural circulation systems Capacity: 100,000 kcal/h – 5,000,000 kcal/h Many technological processes, especially in the food industry, require the use
High Pressure steam generators deliver up to 3 times more steam that penetrates into the very heart of the fabrics. Water is stored in a large water tank, separated from the iron, and sent to a high pressure boiler. A heating element heats the water and transforms it into steam.
The lube oil pumps take suction from this tank and discharge the oil at high pressure (typically at a gauge pressure of from 500 to 1000 kPa). The oil mayor may not pass through a strainer prior to entering the pump. From the lube oil pump discharge piping, the majority of the lube oil is sent to the bearings.
a single fuel, and one steam pressure. The unloaded steam cost example calculation factors in deaerator feedwater Btu content, which does not consider make-up water or condensate return. Also, the calculation uses only one boiler efficiency. Steam is being generated at 100 psig and is being returned to a deaerator tank operating at 10 psig.
Description: High pressure steam generators as single flame-tube boilers with a performance of up to 17.5 t/h with light oil and 22.8 t/h with natural gas. Based on a furnace heat input of 14.0 MW with light fuel oil and 18.2 MW with natural gas, in accordance with the 97/23/EU